Cellulosic Wood Sealer

Sealer is one of the most widely used materials for wood coating. Sealer is one of the most important parts in wood painting, which is used to impregnate wood. Wood has pores and voids that must be saturated so that they do not absorb paint. Also, removing lint and very fine fibers from the surface of the wood is done using sealer and sanding after that.

Cellulosic or quick dry sealer belongs to the category of short oil alkyd paints that dry in the air. The chain length of this type of coating is short and they are usually formulated with nitrocellulose. In formulating these types of paints, nitrocellulose accelerates drying. The special additives of these colors accelerate the drying time of the coatings in the vicinity of air.

This coating is based on cellulose nitrate alkyd resin and according to Mild climate, it is made with first-class quality and has excellent coverage, adhesion and durability.

How to use:

First, clean the desired wooden surface from any contamination (grease, rust, dust).
Stir the contents of the can completely and dilute as needed with instant thinner (Cup4 viscosity: 18 to 20 seconds).
Apply with a gravity feed gun with an output of 1.2 to 1.5 mm, or a suction feed gun with an output of 1.4 to 1.6 mm with a pressure of 3 to 4 bar atmosphere or with a brush.