Features of plastic primer
High adhesion on all types of plastic surfaces
Good adhesion on aluminum surfaces
Optimal filling power
Optimal thermal resistance
High resistance to impact, abrasion, various cleaners, water and humidity
Surface preparation:
Clean the desired surface from any dirt, grease and moisture. Preferably, thoroughly clean the desired work with thinner, alcohol or silicon remover.
Method of application:
Clean all equipment with washing thinner before use.
In order to apply with an air gun, it is recommended that the above coating be diluted by at least 30% with a high-quality Cellulosic thinner 20,000.
Each staining should be applied in parallel. So that each pulse covers 50% of the painted surface with the right angle.
To ensure the desired thickness, corners, sharp edges, rivets and uneven parts should be covered again.
If the re-coating time is prolonged and the thickness of this coating needs to be increased, the desired surface should be prepared for execution with soft sandpaper.
Wash all equipment immediately after use.
Maintenance
It should be kept in a closed space away from direct sunlight at a temperature of 5-35 degrees Celsius. In addition, the storage time of the product is three years.
safety tips
This cover is flammable and should be kept away from flame and heat. Also, while studying and complying with the conditions of the product, the operator is obliged to use the appropriate mask and safety gloves when using the paint, and to perform the operation in an environment with proper ventilation.
