2K PU Paint

How to use:

First, clean the desired surface from any pollution (grease, rust, dust).
Cover the prepared surface with Tehran Nowzhan putty and 2K or Cellulosic primer (if needed).
Stir the contents of the can completely and mix it with hardener at a ratio of 2 to 1 and dilute with Cellulosic thinner 20,000 (viscosity 18 to 20 seconds) as needed.
Use the gravity feed gun with an output of 1.2 to 1.5 mm, and the suctions feed gun with an output of 1.4 to 1.6 mm with a pressure of 3 to 4 bar atmosphere.